GPG

YUM GPG keys

NOTE: If you installed varnishcache/varnish52 with our Bash script, Chef cookbook, or Puppet module the GPG key is automatically installed. There is nothing additional you need to do.

GPG signature info

varnishcache/varnish52 has its YUM metadata signed with varnishcache-varnish52-579BEBB49ADEB60C.pub.gpg.

Important notes

There are two types of GPG keyrings used on RPM-based systems:

  1. RPM's GPG keyring. This keyring is used for verifying signatures on RPM packages.
  2. YUM's GPG keyring. This keyring is used for verifying signatures on repository metadata. There is one keyring per repository on the system.

The YUM GPG keyring (number 2 above) is the keyring that the information on this page refers to.

Import GPG key for varnishcache/varnish52

To import a GPG key to verify YUM metadata, you must create a repo config with the GPG key URL. This is done automatically with all of our install methods.

If you'd like to do this manually for varnishcache/varnish52, follow the instructions on the manual install page

Remove GPG key for varnishcache/varnish52

Unfortunately GPG key removal is not particularly user friendly.

  1. Check your /etc/yum.conf file and note the value of persistdir. If persistdir is not set, you can assume it is /var/lib/yum.
  2. Determine which CPU architecture the repo has been installed for: i386 for 32-bit systems and x86_64 for 64-bit systems.
  3. Determine the verison number of the CentOS or Red Hat you are running (5, 6, or 7).
  4. Replace x86_64 and 7 in the following command with your CPU architecture and CentOS or RedHat version:
  5. gpg --homedir /var/lib/yum/repos/x86_64/7/varnishcache_varnish52/gpgdir --delete-key 579BEBB49ADEB60C

APT GPG keys

NOTE: If you installed varnishcache/varnish52 with our Bash script, Chef cookbook, or Puppet module the GPG key is automatically installed. There is nothing additional you need to do.

GPG signature info

varnishcache/varnish52 has its APT metadata signed with varnishcache-varnish52-579BEBB49ADEB60C.pub.gpg.

Import GPG key for varnishcache/varnish52

  1. Ensure you have curl installed:
    sudo apt-get install curl
  2. Ensure you have GPG installed:
    sudo apt-get install gnupg
  3. Add the GPG key:
    curl -L https://packagecloud.io/varnishcache/varnish52/gpgkey | sudo apt-key add -

Remove GPG key for varnishcache/varnish52

  1. Remove the GPG key:
    sudo apt-key remove 579BEBB49ADEB60C
  2. You will see the output "OK" when complete. You can verify the key has been removed by running:
    sudo apt-key list

List all GPG keys known to APT

  1. List all GPG keys known to APT:
    apt-key list

Package signing keys

This repository has no package signing keys! Repository owners and collaborators can add some below.