Machinekit / machinekit-hal / debian / jessie / machinekit-hal-rt-preempt_0.1.1552301882.gite84356a-1~jessie_amd64.deb

machinekit-hal-rt-preempt_0.1.1552301882.gite84356a-1~jessie_amd64.deb

STEP 1: Have you installed this repository?

If not, run this installation script command:

curl -s https://packagecloud.io/install/repositories/Machinekit/machinekit-hal/script.deb.sh | sudo bash

STEP 2: Install the package

sudo apt-get install machinekit-hal-rt-preempt=0.1.1552301882.gite84356a-1~jessie

HAL stack split from machinekit

Full description:
  HAL stack split from machinekit
 .
 This package provides components and drivers that run on an RT-Preempt system.

Checksums

MD5	244c017db992ca4703b1c71825019fdd
SHA1	a468b9fdac1a7df237d653a218205763227039c3
SHA256	f978fb52298f95a0bd4e140a2372dc266e03235d736fdd9d83f2da744fe61c65
SHA512	ac8cfe77a0510afa225a91655a538831674830d4861ac7ecd415b0c462ac195c7a251a7ea27e7e928f44b43957f2e074a0b8f675529a3f6714cda6ea0a92aa69

Depends

python-numpy, python-xlib, python-configobj, python-zmq, python-protobuf (>= 2.4.1), python-avahi, bc, procps, psmisc, module-init-tools | kmod, libzmq3-dev (>= 4.0.4), libczmq-dev (>= 4.0.2), libjansson4, yapps2-runtime, cgroup-tools, uuid-runtime, libavahi-client3 (>= 0.6.16), libavahi-common3 (>= 0.6.16), libboost-python1.62.0, libboost-system1.62.0, libboost-thread1.62.0, libc6 (>= 2.15), libcgroup1 (>= 0.36.2), libczmq4 (>= 3.0.2), libgcc1 (>= 1:4.2), libmodbus5 (>= 3.0.2), libncurses5 (>= 5.0), libprotobuf10, libpython2.7 (>= 2.7), libstdc++6 (>= 5.2), libtinfo5 (>= 6), libusb-1.0-0 (>= 2:1.0.9), libuuid1 (>= 2.16), libudev1 (>= 183)

Conflicts

machinekit

Provides

machinekit-hal

Files

/usr/lib/linuxcnc/rt-preempt/estop_latchv2.so
/usr/lib/linuxcnc/rt-preempt/estop_latch.so
/usr/lib/linuxcnc/rt-preempt/encoderv2.so
/usr/lib/linuxcnc/rt-preempt/encoder.so
/usr/lib/linuxcnc/rt-preempt/encoder_ratiov2.so
/usr/lib/linuxcnc/rt-preempt/encoder_ratio.so
/usr/lib/linuxcnc/rt-preempt/edgev2.so
/usr/lib/linuxcnc/rt-preempt/edge.so
/usr/lib/linuxcnc/rt-preempt/dummy_stepgen.so
/usr/lib/linuxcnc/rt-preempt/div2v2.so
/usr/lib/linuxcnc/rt-preempt/div2.so
/usr/lib/linuxcnc/rt-preempt/delayline.so
/usr/lib/linuxcnc/rt-preempt/debouncev2.so
/usr/lib/linuxcnc/rt-preempt/debounce.so
/usr/lib/linuxcnc/rt-preempt/deadzonev2.so
/usr/lib/linuxcnc/rt-preempt/deadzone.so
/usr/lib/linuxcnc/rt-preempt/ddtv2.so
/usr/lib/linuxcnc/rt-preempt/ddt.so
/usr/lib/linuxcnc/rt-preempt/counter.so
/usr/lib/linuxcnc/rt-preempt/conv_u64_u32.so
/usr/lib/linuxcnc/rt-preempt/conv_u64_s64.so
/usr/lib/linuxcnc/rt-preempt/conv_u64_float.so
/usr/lib/linuxcnc/rt-preempt/conv_u64_bit.so
/usr/lib/linuxcnc/rt-preempt/conv_u32_s32.so
/usr/lib/linuxcnc/rt-preempt/conv_u32_float.so
/usr/lib/linuxcnc/rt-preempt/conv_u32_bit.so
/usr/lib/linuxcnc/rt-preempt/conv_s64_u64.so
/usr/lib/linuxcnc/rt-preempt/conv_s64_u32.so
/usr/lib/linuxcnc/rt-preempt/conv_s64_s32.so
/usr/lib/linuxcnc/rt-preempt/conv_s64_float.so

Uploaded

over 6 years ago

Package Size

1.55 MB

Installed Size

11 MB

Downloads

wget

wget --content-disposition "https://packagecloud.io/Machinekit/machinekit-hal/packages/debian/jessie/machinekit-hal-rt-preempt_0.1.1552301882.gite84356a-1~jessie_amd64.deb/download.deb?distro_version_id=25"