Machinekit / machinekit-hal / debian / jessie / machinekit-hal-posix_0.2.1552929028.git8a465c0-1~jessie_armhf.deb
Download

machinekit-hal-posix_0.2.1552929028.git8a465c0-1~jessie_armhf.deb

STEP 1: Have you installed this repository?

If not, run this installation script command:

curl -s https://packagecloud.io/install/repositories/Machinekit/machinekit-hal/script.deb.sh | sudo bash
copy 
curl -s https://packagecloud.io/install/repositories/Machinekit/machinekit-hal/script.deb.sh | sudo bash



    

    
  


            

    
STEP 2: Install the package

      
sudo apt-get install machinekit-hal-posix=0.2.1552929028.git8a465c0-1~jessie

  


        

      

            
HAL stack split from Machinekit


  
Full description:
  HAL stack split from Machinekit
 .
 This package provides components and drivers that run on a non-realtime
 (Posix) system.



        
          

            
Checksums

            

  
    

      
        MD5
      
      
        02f3ed739cdfc886f285cbda870939f1
      
    

    

      
        SHA1
      
      
        742d5620484ba74ce578130a9fe7cff2e63c6f1a
      
    

    

      
        SHA256
      
      
        795a297e6ac4f442a707fa3c788144b1b769621414ec98aa40ef0d99da3bb259
      
    

    

      
        SHA512
      
      
        5b4699c03f85839fac2a77d48e9dbb3769989c55d9940ca235885ff415dbd2b0597904d5b9d94a8f6930064b1980ea95de86c734b447d732a4c625b72b9e397c
      
    

  



          

        




                

                  
Depends

                  
    
                    
  • python-numpy, python-xlib, python-configobj, python-zmq, python-protobuf (>= 2.4.1), python-avahi, bc, procps, psmisc, module-init-tools | kmod, libzmq3-dev (>= 4.0.4), libczmq-dev (>= 4.0.2), libjansson4, yapps2-runtime | python-yapps, yapps2, cgroup-tools, uuid-runtime, libavahi-client3 (>= 0.6.16), libavahi-common3 (>= 0.6.16), libboost-python1.62.0 | libboost-python1.67.0, libboost-system1.62.0 | libboost-system1.67.0, libboost-thread1.62.0 | libboost-thread1.67.0, libc6 (>= 2.15), libcgroup1 (>= 0.36.2), libczmq4 (>= 3.0.2), libgcc1 (>= 1:4.2), libmodbus5 (>= 3.0.2), libncurses5 (>= 5.0), libprotobuf10 | libprotobuf17, libpython2.7 (>= 2.7), libstdc++6 (>= 5.2), libtinfo5 (>= 6), libusb-1.0-0 (>= 2:1.0.9), libuuid1 (>= 2.16), libudev1 (>= 183)
    • 
                  

                

                

                  
Conflicts

                  
    
                    
  • machinekit
    • 
                  

                

                

                  
Provides

                  
    
                    
  • machinekit-hal
    • 
                  

                

              

  
Files

  
    
      
  • /usr/lib/linuxcnc/posix/hal_lib.so
    • 
      
  • /usr/lib/linuxcnc/posix/hal_gpio.so
    • 
      
  • /usr/lib/linuxcnc/posix/hal_gpio_h3.so
    • 
      
  • /usr/lib/linuxcnc/posix/hal_chip_gpio.so
    • 
      
  • /usr/lib/linuxcnc/posix/hal_bb_gpio.so
    • 
      
  • /usr/lib/linuxcnc/posix/hal_ax5214h.so
    • 
      
  • /usr/lib/linuxcnc/posix/hal_arm335xQEP.so
    • 
      
  • /usr/lib/linuxcnc/posix/gray2binv2.so
    • 
      
  • /usr/lib/linuxcnc/posix/gray2bin.so
    • 
      
  • /usr/lib/linuxcnc/posix/gearchangev2.so
    • 
      
  • /usr/lib/linuxcnc/posix/gearchange.so
    • 
      
  • /usr/lib/linuxcnc/posix/gantryv2.so
    • 
      
  • /usr/lib/linuxcnc/posix/gantry.so
    • 
      
  • /usr/lib/linuxcnc/posix/flipflopv2.so
    • 
      
  • /usr/lib/linuxcnc/posix/flipflop.so
    • 
      
  • /usr/lib/linuxcnc/posix/feedcompv2.so
    • 
      
  • /usr/lib/linuxcnc/posix/feedcomp.so
    • 
      
  • /usr/lib/linuxcnc/posix/failstop.so
    • 
      
  • /usr/lib/linuxcnc/posix/estop_latchv2.so
    • 
      
  • /usr/lib/linuxcnc/posix/estop_latch.so
    • 
      
  • /usr/lib/linuxcnc/posix/encoderv2.so
    • 
      
  • /usr/lib/linuxcnc/posix/encoder.so
    • 
      
  • /usr/lib/linuxcnc/posix/encoder_ratiov2.so
    • 
      
  • /usr/lib/linuxcnc/posix/encoder_ratio.so
    • 
      
  • /usr/lib/linuxcnc/posix/edgev2.so
    • 
      
  • /usr/lib/linuxcnc/posix/edge.so
    • 
      
  • /usr/lib/linuxcnc/posix/dummy_stepgen.so
    • 
      
  • /usr/lib/linuxcnc/posix/div2v2.so
    • 
      
  • /usr/lib/linuxcnc/posix/div2.so
    • 
      
  • /usr/lib/linuxcnc/posix/delayline.so
    • 
  








        

      

      

          

  
Uploaded

  over 6 years ago




  

    
Package Size

    1.45 MB
  

    

      
Installed Size

      9.27 MB
    




          
          

  
Downloads

  

    

      
11

    

    
  




          

  
wget

  
wget --content-disposition "https://packagecloud.io/Machinekit/machinekit-hal/packages/debian/jessie/machinekit-hal-posix_0.2.1552929028.git8a465c0-1~jessie_armhf.deb/download.deb?distro_version_id=25"