FernV / NativeCAM / linuxmint / sylvia / nativecam_0.1.14b_all.deb
Download

nativecam_0.1.14b_all.deb

STEP 1: Have you installed this repository?

If not, run this installation script command:

curl -s https://packagecloud.io/install/repositories/FernV/NativeCAM/script.deb.sh | sudo bash
copy 
curl -s https://packagecloud.io/install/repositories/FernV/NativeCAM/script.deb.sh | sudo bash



    

    
  


            

    
STEP 2: Install the package

      
sudo apt-get install nativecam=0.1.14b

  


        

      

            
Conversational programming for LinuxCNC


  
Full description:
  Conversational programming for LinuxCNC
 Requires LinuxCNC with support for auxiliary examples
 and auxiliary gladevcp applications.
 To check for availability, run the script:
 $ linuxcnc_var all # if Run-in-place, source rip-environment first
 When available, expected system directories are:
 LINUXCNC_AUX_GLADEVCP=/usr/share/linuxcnc/aux_gladevcp
 LINUXCNC_AUX_EXAMPLES=/usr/share/linuxcnc/aux_examples



        
          

            
Checksums

            

  
    

      
        MD5
      
      
        9936e90b01ece03a429f3a700a7f519a
      
    

    

      
        SHA1
      
      
        8dbf840a4efc4b1d452e389e90d8ce15cc624a66
      
    

    

      
        SHA256
      
      
        36c1bf08ca4ac5abd46539cf34f489c20d13355c422d4761c976980e2639f496
      
    

    

      
        SHA512
      
      
        ba3b87747b97a1f0205c8b6a19a4cb4d411bb6fef00b7db5569431780037b3bd89f0f22d7cf6af3d9ab9726a82aebe61d5801e7f421b78693934c599e94d0a1f
      
    

  



          

        




                

                  
Depends

                  
    
                    
  • python (>= 2.7), python-lxml
    • 
                  

                

                

                  
Recommends

                  
    
                    
  • linuxcnc | linuxcnc-uspace, truetype-tracer
    • 
                  

                

              

  
Files

  
    
      
  • /usr/share/linuxcnc/aux_gladevcp/NativeCAM/graphics/g41.png
    • 
      
  • /usr/share/linuxcnc/aux_gladevcp/NativeCAM/graphics/g-small.png
    • 
      
  • /usr/share/linuxcnc/aux_gladevcp/NativeCAM/graphics/finish.png
    • 
      
  • /usr/share/linuxcnc/aux_gladevcp/NativeCAM/graphics/file-probe.png
    • 
      
  • /usr/share/linuxcnc/aux_gladevcp/NativeCAM/graphics/file-gcode.png
    • 
      
  • /usr/share/linuxcnc/aux_gladevcp/NativeCAM/graphics/feed.png
    • 
      
  • /usr/share/linuxcnc/aux_gladevcp/NativeCAM/graphics/feed-fact.png
    • 
      
  • /usr/share/linuxcnc/aux_gladevcp/NativeCAM/graphics/ext-angle.png
    • 
      
  • /usr/share/linuxcnc/aux_gladevcp/NativeCAM/graphics/enable.png
    • 
      
  • /usr/share/linuxcnc/aux_gladevcp/NativeCAM/graphics/ellipse.png
    • 
      
  • /usr/share/linuxcnc/aux_gladevcp/NativeCAM/graphics/ellipse-rad-y.png
    • 
      
  • /usr/share/linuxcnc/aux_gladevcp/NativeCAM/graphics/ellipse-rad-x.png
    • 
      
  • /usr/share/linuxcnc/aux_gladevcp/NativeCAM/graphics/ellipse-points.png
    • 
      
  • /usr/share/linuxcnc/aux_gladevcp/NativeCAM/graphics/e-diam.png
    • 
      
  • /usr/share/linuxcnc/aux_gladevcp/NativeCAM/graphics/dz.png
    • 
      
  • /usr/share/linuxcnc/aux_gladevcp/NativeCAM/graphics/dy.png
    • 
      
  • /usr/share/linuxcnc/aux_gladevcp/NativeCAM/graphics/dx.png
    • 
      
  • /usr/share/linuxcnc/aux_gladevcp/NativeCAM/graphics/dsub.png
    • 
      
  • /usr/share/linuxcnc/aux_gladevcp/NativeCAM/graphics/drills.png
    • 
      
  • /usr/share/linuxcnc/aux_gladevcp/NativeCAM/graphics/drill.png
    • 
      
  • /usr/share/linuxcnc/aux_gladevcp/NativeCAM/graphics/drill-start.png
    • 
      
  • /usr/share/linuxcnc/aux_gladevcp/NativeCAM/graphics/drill-single.png
    • 
      
  • /usr/share/linuxcnc/aux_gladevcp/NativeCAM/graphics/drill-retract.png
    • 
      
  • /usr/share/linuxcnc/aux_gladevcp/NativeCAM/graphics/drill-point.png
    • 
      
  • /usr/share/linuxcnc/aux_gladevcp/NativeCAM/graphics/drill-mode.png
    • 
      
  • /usr/share/linuxcnc/aux_gladevcp/NativeCAM/graphics/drill-irr-circle.png
    • 
      
  • /usr/share/linuxcnc/aux_gladevcp/NativeCAM/graphics/drill-in-center.png
    • 
      
  • /usr/share/linuxcnc/aux_gladevcp/NativeCAM/graphics/drill-end.png
    • 
      
  • /usr/share/linuxcnc/aux_gladevcp/NativeCAM/graphics/drill-dwell.png
    • 
      
  • /usr/share/linuxcnc/aux_gladevcp/NativeCAM/graphics/drill-circle.png
    • 
  






        

      

      

          

  
Uploaded

  over 6 years ago




  

    
Package Size

    1.76 MB
  

    

      
Installed Size

      3.41 MB
    




          
          

  
Downloads

  

    

      
47

    

    
  




          

  
wget

  
wget --content-disposition "https://packagecloud.io/FernV/NativeCAM/packages/linuxmint/sylvia/nativecam_0.1.14b_all.deb/download.deb?distro_version_id=189"